Boot the RPi with the blank micro SD card and the prepared USB memory stick (steps 16-17).Prepare a blank micro SD card to insert into the RPi (step 16).Prepare a USB memory stick with the EVE-OS installer image (step 15).Update the RPi4 bootloader to the latest version and configure the RPi to boot from a USB memory stick (steps 1-14).(Instead of this approach, you can also flash a micro SD card with a pre-built EVE-OS image specific to RPi4.) Highlights of the approach are described below: This document assumes you will use the standard EVE-OS installation approach that runs an installer from a USB memory stick to initiate the EVE-OS image installation process on a blank micro SD card that will be inserted into the RPi.

(These media will be completely overwritten!) It’s also helpful to have your RPi connected to an HDMI monitor. To install EVE-OS onto a Raspberry Pi 4 (RPi4), you will need 1-2 micro SD cards and one USB memory stick, at a minimum. 2 microSD cards (1G or larger) - can get by with one if re-use it for fw update and EVE-OS.Raspberry Pi 4 (RPi4) with 4 or 8GB RAM.

For ipod download EVE Online